Your Perfect Assignment is Just a Click Away
We Write Custom Academic Papers

100% Original, Plagiarism Free, Customized to your instructions!

glass
pen
clip
papers
heaphones

INTRODUCTION TO QUANTITATIVE METHODS

INTRODUCTION TO QUANTITATIVE METHODS

Module Title: INTRODUCTION TO QUANTITATIVE METHODS

Module Code: GRM3001

Assessment Method: ASSIGNMENT

Level: 3 Block: 1

Module Credits: 20 Weighting: 50%

Due Date: 24-Dec-2020, 09:00 PM Word Count: 2,000

Examiner(s): Dr. Romeo, Ms. Pavithra & Mr. Faisal

Version: 1

Pg. 2 Version 1

Gulf College – Faculty of Business and Management Studies – In academic

Affiliation with CARDIFF SCHOOL OF MANAGEMENT

A. Written work

? A signed declaration that the work is your own (apart from otherwise referenced acknowledgements) must be included after the reference page of your assignment

? Each page must be numbered. ? Where appropriate, a contents page, a list of tables/figures and a list of abbreviations

should precede your work. ? All referencing must adhere to School/Institutional requirements. ? A word count must be stated at the end of your work. ? Appendices should be kept to the minimum and be of direct relevance to the content of

your work. ? All tables and figures must be correctly numbered and labelled.

B. Other types of coursework/assignments

? Where coursework involves oral presentations, discussions, poster presentations, etc., specific instructions will be provided by your module leader/team.

?———————————————————————————————————————————————

Rewrite below part just after the References of your assignment.

WORK DECLARATION

I, [Name of Student], hereby declare that the uploaded ASSIGNMENT through Turnitin is my own

work. I affirm that this has been researched and completed in accordance with the college rules

and regulations on plagiarism.

I acknowledge the advice given by the module tutors on proper referencing to avoid plagiarism and

the rules on the academic unfair practice.

I acknowledge that I read and understand the plagiarism guide written at the end of this

assessment. Any academic misconduct will be handled according to the rules and regulations of the

university.

[Name of Student]

Pg. 3 Version 1

General instructions

ASSIGNMENT must be submitted online through Turnitin before due date. An acknowledgement will

be given to you by your teacher upon presentation of the finance clearance. This is your receipt,

keep it.

The only circumstance in which assignments can be uploaded late via Turnitin is if a Mitigating

Circumstances (MC) form is submitted at the same time. In these circumstances work may be

submitted within five (5) working days. Make sure to secure MC form and submit the same to the

concerned staff.

Write the number of words used, excluding references, at the end of your assignment. Provide the

list of sources you used at the last page of your assignment with proper label ‘References’. You may

include diagrams, figures etc. without word penalty. The number of words will be + or – 10% of the

total words allowed.

A work declaration must be included just after the reference page of your assignment. This ensures

that you prepare your work in good faith. Any form of collusion and/or academic unfair practice will

be dealt with according to the pertinent rules and regulations of the partner university. Please read

carefully the plagiarism guide.

Assessment Details

This ASSIGNMENT comprises 50% of the total assessments marks. This will develop the following

skills:

? Analytical skills: The assignment enables the students to analyse and evaluate the benefits of the different activities done in the class.

? Research skills. This skill will eventually help them understand and evaluate the meaning, concept and solution of percentages, powers and roots, algebraic expressions and equations.

In addition, the ASSIGNMENT will test the following learning outcomes:

? Use a range of techniques to represent and manipulate data, as well as using statistical techniques to analyse data.

? Apply appropriate techniques to solve quantitative problems in business, management, science and computing.

Pg. 4 Version 1

Assignment Task

Using references to relevant theories, concepts about probability, estimation of the mean, median and

standard deviation and the line of best fit and its correlation, write an assignment of 2000 words by

answering the following.

Question 1

The following table gives the overtime earnings for 100 employees in A Ltd. Company.

From the table above

A. Prepare a table of values and calculate an estimate for the mean and standard deviation. B. Construct a less than cumulative frequency curve for the data above. C. Use the cumulative frequency graph to estimate the median.

Question 2 There are 8 yellow and 4 red balls inside an urn.

A. Two balls are selected one by one with replacement. What is the probability that the first is yellow and the second is red?

B. What is the probability that the first is yellow and the second is red if the two balls are drawn without replacement?

Question 3 Complete the table with data showing the results of the examinations out of 100 taken by 9 students in Statistics class depicting either a positive or negative correlation.

Exam 1 (x)

Exam 2 (y)

Overtime earnings (OMR)

No. of employees (f)

0 ? 10 ?

10 ? 20 ?

20 ? 30 ?

30 ? 40 25

40 ? 50 18

50 ? 60 ?

60 ? 70 ?

70 ? 80 ?

80? 100 ?

?f=100

Pg. 5 Version 1

Using the following information above: A. Draw a scatter graph. B. Draw a line of best fit and comment on the correlation. C. Work out the gradient of the line of best fit.

Your report should contain the following:

? Introduction: Introduction which will reflect the overview related to the concept of probability,

estimation of the mean, median and standard deviation and the line of best fit and its correlation. (200

words equivalent)

? Solution and Discussion

Solution and discussion in question one. Student needs to provide the table of values to be able to

calculate the mean and the standard deviation. Furthermore, the student needs to provide frequency

cumulative data to be able to construct a cumulative frequency curve to estimate the median. The

discussion of the completion of the table of values, construction of the cumulative frequency curve and

the estimation of the median should be included. (700 words equivalent)

Solution and discussion in question two. Student needs to provide the calculation of the probability in

question A and question B. The discussion of the calculation should be included. (400 words equivalent)

Solution and discussion in question three. Student needs complete the table depicting either a positive

or negative correlation. Plot the corresponding ordered pairs in the table to draw a scatter graph, draw a

line of best fit and comment on the correlation and work out for the gradient of the line of best fit. The

discussion of plotting points to draw a scatter graph, line of best fit, gradient of the line of best fit and

the correlation should be included. (500 words equivalent)

? Conclusion – Student needs to summarise the key points in the discussion. (200 words equivalent)

***END OF ASSIGNMENT TASK***

Pg. 6 Version 1

Guidelines to Students:

? Diagrams are an effective and efficient method of conveying information. To obtain good marks it

will be necessary to include diagrams where relevant to illustrate your discussion.

? Make sure that you incorporate these diagrams fully into your reports. In other words make sure

you refer to them in your text. Information should be drawn from respected reputable academic

sources such as textbooks and academic journals, and reports from economic think tanks.

Pg. 7 Version 1

GGRM3001 – INTRODUCTION TO QUANTITATIVE METHODS AY: 2020-2021 / 1st SEMESTER

Marking Scheme Question

No. Description

Marks Allocated

1 Introduction – An overview related to the concept of probability, estimation of the

mean, median and standard deviation and the line of best fit and its correlation 5

2a

A. Completion of the table values of the mean – 3 marks Formula of mean – 1 mark Calculation of mean – 2 marks Completion of the table values of standard deviation – 4 marks Formula of Standard deviation – 1 mark Calculation of standard deviation – 4 marks Discussion – 10 marks B. Table of Cumulative frequency – 3 marks Construction of the graph of cumulative frequency – 4 marks Discussion – 4 marks C. Median Formula – 1 mark Calculation of median using formula – 1 mark Showing the median using the graph – 2 marks

The value traced by the students – 2 marks Discussion – 3 marks

45

2b

A. Probability that it is yellow – 2 marks Probability that it is red – 2 marks Probability of yellow and red – 3 marks Discussion – 5 marks B. Probability that it is yellow – 2 marks Probability that it red – 2 marks

Probability of yellow or red – 4 marks Discussion – 5 marks

25

2c

A. Completion of the table depicting a positive or negative correlation – 5 marks B. Drawing scatter graph with scaling – 2 marks

Drawing scatter graph with plotting – 2 marks Discussion – 3 marks

C. Line of best fit – 1 mark Comment on the correlation – 2 marks D. Gradient Formula – 1 mark

Gradient of the line of best fit – 2 marks Discussion – 3 marks

20

3

Conclusion-Summary of the significant points

5

Total 100

Pg. 8 Version 1

Plagiarism

1. Plagiarism, which can be defined as using without acknowledgement another person’s words or ideas and submitting them for assessment as though it were one’s own work, for instance by copying, translating from one language to another or unacknowledged paraphrasing. Further examples of plagiarism are given below:

Use of any quotation(s) from the published or unpublished work of other persons, whether published in textbooks, articles, the Web, or in any other format, which quotations have not been clearly identified as such by being placed in quotation marks and acknowledged.

Use of another person’s words or ideas that have been slightly changed or paraphrased to make it look different from the original.

Summarising another person’s ideas, judgments, diagrams, figures, or computer programmes without reference to that person in the text and the source in a bibliography or reference list.

Use of services of essay banks and/or any other agencies.

Use of unacknowledged material downloaded from the Internet.

Re-use of one’s own material except as authorised by the department.

2. Collusion, which can be defined as when work that has been undertaken by or with others is

submitted and passed off as solely as the work of one person. This also applies where the work

of one candidate is submitted in the name of another. Where this is done with the knowledge of

the originator both parties can be considered to be at fault.

3. Fabrication of data, making false claims to have carried out experiments, observations,

interviews or other forms of data collection and analysis, or acting dishonestly in any other way.

Plagiarism Detection Software (PDS)

As part of its commitment to quality and the maintenance of academic standards, the University reserves the right to use Plagiarism Detection Software (PDS), including Turnitin. Such software makes no judgment as to whether a piece of work has been plagiarised; it simply highlights sections of text that have been found in other sources.

The use of plagiarism detection software fulfills two functions. The first is to enhance student learning (i.e. as a developmental tool); the second is to guard against and identify unfair practice in assessment.

Further information and guidance can be found in the University’s policy on the Use of Plagiarism

Detection Software.

Applied Sciences
Architecture and Design
Biology
Business & Finance
Chemistry
Computer Science
Geography
Geology
Education
Engineering
English
Environmental science
Spanish
Government
History
Human Resource Management
Information Systems
Law
Literature
Mathematics
Nursing
Physics
Political Science
Psychology
Reading
Science
Social Science
Home
Homework Answers
Blog
Archive
Tags
Reviews
Contact
twitterfacebook
Copyright © 2021 SweetStudy.comSWEETSTUDY.COM – YOUR HOMEWORK ANSWERS
chat0
Home.Literature.
Help.
Log in / Sign up
math
profile
repunzel

GRM3001IQMWRIT2L3B1V1JAN2021.pdf
Home>Mathematics homework help>math
FACULTY OF BUSINESS AND MANAGEMENT STUDIES

UNDERGRADUATE BUSINESS PROGRAMME

ACADEMIC YEAR 2020-2021, 1st SEMESTER

January – 2021

WRIT2

Programme Title: BMS, A&F, MM, BE, BIS

Module Title: INTRODUCTION TO QUANTITATIVE METHODS

Module Code: GRM3001

Assessment Method: ASSIGNMENT

Level: 3 Block: 1

Module Credits: 20 Weighting: 50%

Due Date: 24-Dec-2020, 09:00 PM Word Count: 2,000

Examiner(s): Dr. Romeo, Ms. Pavithra & Mr. Faisal

Version: 1

Pg. 2 Version 1

Gulf College – Faculty of Business and Management Studies – In academic

Affiliation with CARDIFF SCHOOL OF MANAGEMENT

A. Written work

? A signed declaration that the work is your own (apart from otherwise referenced acknowledgements) must be included after the reference page of your assignment

? Each page must be numbered. ? Where appropriate, a contents page, a list of tables/figures and a list of abbreviations

should precede your work. ? All referencing must adhere to School/Institutional requirements. ? A word count must be stated at the end of your work. ? Appendices should be kept to the minimum and be of direct relevance to the content of

your work. ? All tables and figures must be correctly numbered and labelled.

B. Other types of coursework/assignments

? Where coursework involves oral presentations, discussions, poster presentations, etc., specific instructions will be provided by your module leader/team.

?———————————————————————————————————————————————

Rewrite below part just after the References of your assignment.

WORK DECLARATION

I, [Name of Student], hereby declare that the uploaded ASSIGNMENT through Turnitin is my own

work. I affirm that this has been researched and completed in accordance with the college rules

and regulations on plagiarism.

I acknowledge the advice given by the module tutors on proper referencing to avoid plagiarism and

the rules on the academic unfair practice.

I acknowledge that I read and understand the plagiarism guide written at the end of this

assessment. Any academic misconduct will be handled according to the rules and regulations of the

university.

[Name of Student]

Pg. 3 Version 1

General instructions

ASSIGNMENT must be submitted online through Turnitin before due date. An acknowledgement will

be given to you by your teacher upon presentation of the finance clearance. This is your receipt,

keep it.

The only circumstance in which assignments can be uploaded late via Turnitin is if a Mitigating

Circumstances (MC) form is submitted at the same time. In these circumstances work may be

submitted within five (5) working days. Make sure to secure MC form and submit the same to the

concerned staff.

Write the number of words used, excluding references, at the end of your assignment. Provide the

list of sources you used at the last page of your assignment with proper label ‘References’. You may

include diagrams, figures etc. without word penalty. The number of words will be + or – 10% of the

total words allowed.

A work declaration must be included just after the reference page of your assignment. This ensures

that you prepare your work in good faith. Any form of collusion and/or academic unfair practice will

be dealt with according to the pertinent rules and regulations of the partner university. Please read

carefully the plagiarism guide.

Assessment Details

This ASSIGNMENT comprises 50% of the total assessments marks. This will develop the following

skills:

? Analytical skills: The assignment enables the students to analyse and evaluate the benefits of the different activities done in the class.

? Research skills. This skill will eventually help them understand and evaluate the meaning, concept and solution of percentages, powers and roots, algebraic expressions and equations.

In addition, the ASSIGNMENT will test the following learning outcomes:

? Use a range of techniques to represent and manipulate data, as well as using statistical techniques to analyse data.

? Apply appropriate techniques to solve quantitative problems in business, management, science and computing.

Pg. 4 Version 1

Assignment Task

Using references to relevant theories, concepts about probability, estimation of the mean, median and

standard deviation and the line of best fit and its correlation, write an assignment of 2000 words by

answering the following.

Question 1

The following table gives the overtime earnings for 100 employees in A Ltd. Company.

From the table above

A. Prepare a table of values and calculate an estimate for the mean and standard deviation. B. Construct a less than cumulative frequency curve for the data above. C. Use the cumulative frequency graph to estimate the median.

Question 2 There are 8 yellow and 4 red balls inside an urn.

A. Two balls are selected one by one with replacement. What is the probability that the first is yellow and the second is red?

B. What is the probability that the first is yellow and the second is red if the two balls are drawn without replacement?

Question 3 Complete the table with data showing the results of the examinations out of 100 taken by 9 students in Statistics class depicting either a positive or negative correlation.

Exam 1 (x)

Exam 2 (y)

Overtime earnings (OMR)

No. of employees (f)

0 ? 10 ?

10 ? 20 ?

20 ? 30 ?

30 ? 40 25

40 ? 50 18

50 ? 60 ?

60 ? 70 ?

70 ? 80 ?

80? 100 ?

?f=100

Pg. 5 Version 1

Using the following information above: A. Draw a scatter graph. B. Draw a line of best fit and comment on the correlation. C. Work out the gradient of the line of best fit.

Your report should contain the following:

? Introduction: Introduction which will reflect the overview related to the concept of probability,

estimation of the mean, median and standard deviation and the line of best fit and its correlation. (200

words equivalent)

? Solution and Discussion

Solution and discussion in question one. Student needs to provide the table of values to be able to

calculate the mean and the standard deviation. Furthermore, the student needs to provide frequency

cumulative data to be able to construct a cumulative frequency curve to estimate the median. The

discussion of the completion of the table of values, construction of the cumulative frequency curve and

the estimation of the median should be included. (700 words equivalent)

Solution and discussion in question two. Student needs to provide the calculation of the probability in

question A and question B. The discussion of the calculation should be included. (400 words equivalent)

Solution and discussion in question three. Student needs complete the table depicting either a positive

or negative correlation. Plot the corresponding ordered pairs in the table to draw a scatter graph, draw a

line of best fit and comment on the correlation and work out for the gradient of the line of best fit. The

discussion of plotting points to draw a scatter graph, line of best fit, gradient of the line of best fit and

the correlation should be included. (500 words equivalent)

? Conclusion – Student needs to summarise the key points in the discussion. (200 words equivalent)

***END OF ASSIGNMENT TASK***

Pg. 6 Version 1

Guidelines to Students:

? Diagrams are an effective and efficient method of conveying information. To obtain good marks it

will be necessary to include diagrams where relevant to illustrate your discussion.

? Make sure that you incorporate these diagrams fully into your reports. In other words make sure

you refer to them in your text. Information should be drawn from respected reputable academic

sources such as textbooks and academic journals, and reports from economic think tanks.

Pg. 7 Version 1

GGRM3001 – INTRODUCTION TO QUANTITATIVE METHODS AY: 2020-2021 / 1st SEMESTER

Marking Scheme Question

No. Description

Marks Allocated

1 Introduction – An overview related to the concept of probability, estimation of the

mean, median and standard deviation and the line of best fit and its correlation 5

2a

A. Completion of the table values of the mean – 3 marks Formula of mean – 1 mark Calculation of mean – 2 marks Completion of the table values of standard deviation – 4 marks Formula of Standard deviation – 1 mark Calculation of standard deviation – 4 marks Discussion – 10 marks B. Table of Cumulative frequency – 3 marks Construction of the graph of cumulative frequency – 4 marks Discussion – 4 marks C. Median Formula – 1 mark Calculation of median using formula – 1 mark Showing the median using the graph – 2 marks

The value traced by the students – 2 marks Discussion – 3 marks

45

2b

A. Probability that it is yellow – 2 marks Probability that it is red – 2 marks Probability of yellow and red – 3 marks Discussion – 5 marks B. Probability that it is yellow – 2 marks Probability that it red – 2 marks

Probability of yellow or red – 4 marks Discussion – 5 marks

25

2c

A. Completion of the table depicting a positive or negative correlation – 5 marks B. Drawing scatter graph with scaling – 2 marks

Drawing scatter graph with plotting – 2 marks Discussion – 3 marks

C. Line of best fit – 1 mark Comment on the correlation – 2 marks D. Gradient Formula – 1 mark

Gradient of the line of best fit – 2 marks Discussion – 3 marks

20

3

Conclusion-Summary of the significant points

5

Total 100

Pg. 8 Version 1

Plagiarism

1. Plagiarism, which can be defined as using without acknowledgement another person’s words or ideas and submitting them for assessment as though it were one’s own work, for instance by copying, translating from one language to another or unacknowledged paraphrasing. Further examples of plagiarism are given below:

Use of any quotation(s) from the published or unpublished work of other persons, whether published in textbooks, articles, the Web, or in any other format, which quotations have not been clearly identified as such by being placed in quotation marks and acknowledged.

Use of another person’s words or ideas that have been slightly changed or paraphrased to make it look different from the original.

Summarising another person’s ideas, judgments, diagrams, figures, or computer programmes without reference to that person in the text and the source in a bibliography or reference list.

Use of services of essay banks and/or any other agencies.

Use of unacknowledged material downloaded from the Internet.

Re-use of one’s own material except as authorised by the department.

2. Collusion, which can be defined as when work that has been undertaken by or with others is

submitted and passed off as solely as the work of one person. This also applies where the work

of one candidate is submitted in the name of another. Where this is done with the knowledge of

the originator both parties can be considered to be at fault.

3. Fabrication of data, making false claims to have carried out experiments, observations,

interviews or other forms of data collection and analysis, or acting dishonestly in any other way.

Plagiarism Detection Software (PDS)

As part of its commitment to quality and the maintenance of academic standards, the University reserves the right to use Plagiarism Detection Software (PDS), including Turnitin. Such software makes no judgment as to whether a piece of work has been plagiarised; it simply highlights sections of text that have been found in other sources.

The use of plagiarism detection software fulfills two functions. The first is to enhance student learning (i.e. as a developmental tool); the second is to guard against and identify unfair practice in assessment.

Further information and guidance can be found in the University’s policy on the Use of Plagiarism

Detection Software.

Applied Sciences
Architecture and Design
Biology
Business & Finance
Chemistry
Computer Science
Geography
Geology
Education
Engineering
English
Environmental science
Spanish
Government
History
Human Resource Management
Information Systems
Law
Literature
Mathematics
Nursing
Physics
Political Science
Psychology
Reading
Science
Social Science
Home
Homework Answers
Blog
Archive
Tags
Reviews
Contact
twitterfacebook
Copyright © 2021 SweetStudy.com

Order Solution Now

Our Service Charter

1. Professional & Expert Writers: Topnotch Essay only hires the best. Our writers are specially selected and recruited, after which they undergo further training to perfect their skills for specialization purposes. Moreover, our writers are holders of masters and Ph.D. degrees. They have impressive academic records, besides being native English speakers.

2. Top Quality Papers: Our customers are always guaranteed of papers that exceed their expectations. All our writers have +5 years of experience. This implies that all papers are written by individuals who are experts in their fields. In addition, the quality team reviews all the papers before sending them to the customers.

3. Plagiarism-Free Papers: All papers provided byTopnotch Essay are written from scratch. Appropriate referencing and citation of key information are followed. Plagiarism checkers are used by the Quality assurance team and our editors just to double-check that there are no instances of plagiarism.

4. Timely Delivery: Time wasted is equivalent to a failed dedication and commitment. Topnotch Essay is known for timely delivery of any pending customer orders. Customers are well informed of the progress of their papers to ensure they keep track of what the writer is providing before the final draft is sent for grading.

5. Affordable Prices: Our prices are fairly structured to fit in all groups. Any customer willing to place their assignments with us can do so at very affordable prices. In addition, our customers enjoy regular discounts and bonuses.

6. 24/7 Customer Support: At Topnotch Essay, we have put in place a team of experts who answer to all customer inquiries promptly. The best part is the ever-availability of the team. Customers can make inquiries anytime.